Our Product Range

Marine Plywood

Exterior Construction

Only specially manufactured marine plywoods should be used for the exterior. All panels are manufactured in accordance with the regulations of the "Germanischer Lloyd" or do even bear its stamp. They are glued in accordnace with AW 100. The outer veneers are 1,5mm thick.
For further information - Original marine plywood

B1 / B2 – Marine plywood mahogany rotary cut veneer
Quality: 20 years of warranty for the gluing, manufactured with specially selected veneers,
according to the quality standards of the "Germanischer Lloyd", cohesiveness group according to "Germanischer Lloyd": F1
Application: These panels are are suitable for natural varnish or colored surfaces.
Construction: Mahogany-rotary cut deck
Panel size B1: 250 x 125 cm
Thickness B1: 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, 15 mm, 18 mm, 20 mm, 22 mm and 25 mm
Panel size B2: 250 x 160 cm
Thickness B2: 6 mm, 9 mm, 12 mm and 15 mm

 

B3 – Marine plywood gaboon / okumé rotary cut veneer
Quality: 20 years of warranty for the gluing, manufactured with specially selected veneers and
according to the quality standards of the "Germanischer Lloyd"
Cohesiveness group according to "Germanischer Lloyd": F2
Application: This panel is lighter and softer than mahogany (B1/B2)
Construction: dGaboon / Okumé rotary cut deck
Panel size: 250 x 125 cm
Thickness: 2 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 15 mm, 18 mm, 20 mm, 22 mm, 25 mm and 40 mm

 

B4 – Marine plywood mahogany sliced cut veneer

Quality: 20 years of warranty for the gluing, manufactured according to the quality standards of the "Germanischer Lloyd",

outside veneer mahogany sliced cut deck.
Especially strong and high quality - the best boat biulding panel that you can get at DANIEL GEORGUS! Cohesiveness group according to "Germanischer Lloyd": F1
Construction: Mahogany
Panel size: 250 x 125 cm
Thickness: 4 mm and 6 mm one sided, 8 mm, 10 mm, 12 mm, 15 mm and 18 mm two sided

 

C1 – Original Marine Plywood Teak
Sliced cut deck
Application: Suitable for bulkheads and constructional systems made of teak.
Construction: Inner plies made of Okumé
Panel size: 250 x 125 cm
Thickness: 4 mm and 6 mm one sided, 10 mm, 12 mm and 15 mm two sided

 

C2 – Marine Plywood Sapeli-Mahogany
Sliced cut deck
Application: This deck is an alternative to the B4 Mahogany sliced cut deck and weighs less.
Construction: Inner plies made of Okumé, therefore lighter than B4
Panel size: 250 x 170 cm
Thickness: 4 / 5 mm and 6 mm one sided, 8 mm, 10 mm, 12 mm and 15 mm two sided

 

C3 – Original Marine Plywood Khaya-Mahogany
Sliced cut dec
Application: This deck is an alternative to the B4 Mahogany sliced cut deck and weighs less.
Construction: Inner plies made of Okumé, therefore lighter than B4
Panel size: 250 x 170 cm
Thickness: 4 / 5 mm and 6 mm one sided, 8 mm, 10 mm, 12 mm and 15 mm two sided

de Deutsch   en English

NEW
NEW


   

 

Daniel R. Georgus
GmbH & Co. KG

Simon-Bolivar-Str. 29
D-28197 Bremen
Fon: 0049 421 / 54 54 11
Fax: 0049 421 / 54 79 94
Contact us

Site Map | Printable View | © 2008 - 2025 Daniel Georgus oHG | Privacy | Data Protection