Our Product Range

Marine Plywood

Special Requirements

Whenever the material has to meet special requirements, you can use the following of our marine plywoods. In order to save weight, you can use our very lightweight sandwich panels. When dealing with engine room covers, we recommend our noise protection panels. Do you have other special needs. Please contact us. Contact
 

D5 – Sandwich panels
These panels are available with different kinds of outer veneers like teak, Sapeli- or Khaya-Mahogany etc.
Application: Extremely lightweight marine plywood panels that should be used when you want to save weight.
Construction: 4 mm interior-plywood two-sided, inner ply Divinycell, density: 60 kg / m³, self-extinguishing, flame resistant
Version A: 4 / 10 / 4 mm, total thickness: ca. 18 mm
Version B: 4 / 15 / 4 mm, total thickness: ca. 23 mm
Panel size: 249 x 124 cm

 

D6 I – Interplex
Laminate-coated all-weather plywood
Application: Suitable for wet rooms, cooling chambers and damp locations.
Construction: One-sided white laminate-coating that is 6 mm thick (crystal-surface), counter draw on the back side
Panel size: 250 x 122 cm
Thickness: 5 mm, 11 mm and 16 mm

 

D7 – Lightweight noise protection panels
Application: Suitable for engine room covers and all areas that require noise protection. Weighs a little less than D8.
Construction: There are two different versions available
Version A: On both sides 6 mm Okumé-marine plywood filled with 4 mm of special synthetic material, total thickness 16 mm, weight ca. 8 kg /m², average sound insulation values (100 - 3200 Hz) Rgem: 29 dB
Version B: On both sides 7 mm Okumé-marine plywood filled with 6 mm of special synthetic material, weight ca. 10 kg /m², average sound insulation values (100 - 3200 Hz) Rgem: 31 dB
We will be happy to send you technical data sheets upon request.
Panel size: 250 x 125 cm

 

D8 – Heavy Noise Protection Panels with lead-plated rubber inlay
Application: Suitable for engine room covers and all areas that require noise protection.
Construction:There are two different versions available
Version A:On both sides 6 mm Okumé-marine plywood filled with a 4 mm lead-plated rubber inlay, total thickness 16 mm, weight ca. 15 kg /m², average sound insulation values (100 - 3200 Hz) Rgem: 30 dB
Version B: On both sides 7 mm Okumé-marine plywood filled with a 6 mm lead-plated rubber inlay, total thickness 16 mm, weight ca. 24 kg /m², average sound insulation values (100 - 3200 Hz) Rgem: 34 dB
We will be happy to send you technical data sheets upon request.
Panel size: 250 x 125 cm

 

de Deutsch   en English

NEW
NEW


   

 

Daniel R. Georgus
GmbH & Co. KG

Simon-Bolivar-Str. 29
D-28197 Bremen
Fon: 0049 421 / 54 54 11
Fax: 0049 421 / 54 79 94
Contact us

Site Map | Printable View | © 2008 - 2019 Daniel Georgus oHG | Privacy | Data Protection